BZHTP - 2-(METHYLAMINO)ETHANOL, 0-313

  • MSDS: BZHTP
  • Manufacturer: CHEM SERVICE INC
  • Product Name: 2-(METHYLAMINO)ETHANOL, 0-313
  • National Stock Number: 6810-00N066163
Product Identification

Product ID:2-(METHYLAMINO)ETHANOL, 0-313
MSDS Date:09/01/1988
FSC:6810
NIIN:00N066163
MSDS Number: BZHTP

Responsible Party
CHEM SERVICE INC
WEST CHESTER, PA 19381
US

Emergency Phone: 215-692-3026

Info Phone: 215-692-3026

Cage: 84898

Contractor
CHEM SERVICE, INC
599 WEST CHESTER, PA 19301-9650 US

Telephone: 610-692-3026

Cage: 8Y898

Ingredients

ETHANOL, 2-(METHYLAMINO)-; (2-(METHYLAMINO)ETHANOL)

CAS: 109-83-1

RTECS: KL6650000

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:LD50:(RAT) 2340 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ALL CHEMICALS SHOULD BE CONSIDERED
HAZARDOUS - AVOID DIRECT PHYSICAL CONTACT! VAPORS &/OR DIRECT EYE
CONTACT CAN CAUSE SEVERE EYE BURNS. CAN CAUSE SEVERE SKIN BURNS.
MAY BE RAPIDLY ABSORBED THRU SKIN W/POTENTIAL ADVERSE HEALTH
EFFECTS. DUST &/OR VAPORS CAN CAUSE IRRITATION TO RESPIRATORY
TRACT. CAN BE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:IRRITATING TO MUCOUS MEMBRANES. CAN
CAUSE ALLERGIC SKIN REACTION. REPEATED EXPOSURE TO VAPORS &/OR DUST
CAN CAUSE EYE INJURY. THIS COMPOUND IS CONSIDERED TO BE SLIGHTLY
TOXIC.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:FLUSH CONTINUOUSLY W/WATER FOR AT LST 15-20 MINS.
SKIN:FLUSH W/WATER FOR 15-20 MINS. IF NO BURNS HAVE OCCURRED-USE
SOAP & WATER TO CLEANSE SKIN. REMOVE & WASH CONTAM CLTHG. GET MED
ATTN IF NEC. D O NOT WEAR SHOES/CLTHG UNTIL ABSOLUTELYFREE OF ALL
CHEM ODORS. INHAL:REMOVE PATIENT TO FRESH AIR. ADMIN OXYG IF
PATIENT IS HAVING DFCLTY BRTHG. IF PATIENT HAS STOPPED BRTHG ADMIN
ARTF RESP. (SUPDAT)

Fire Fighting

Flash Point:162F,72C
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL POWDER. DO NOT USE
WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS IS A COMBUSTIBLE COMPOUND. NO
EXPLOSION LIMITS ARE AVAILABLE FOR THIS COMPOUND.

Accidental Release

Spill Release Procedures:EVACUATE AREA. WEAR APPROPRIATE OSHA-REGULATED
EQUIPMENT. VENTILATE AREA. ABSORB ON VERMICULITE OR SIMILAR
MATERIAL. SWEEP UP & PLACE IN AN APPROPRIATE CONTAINER. HOLD FOR
DISPOSAL. WASH CONTAMINATED SURFACES TO REMOVE ANY RESIDUES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT W/SKIN, EYES & CLOTHING.
KEEP TIGHTLY CLOSED & STORE IN A COOL, DRY PLACE. STORE ONLY
W/COMPATIBLE CHEMICALS.
Other Precautions:PERSONS NOT SPECIFICALLY & PROPERLY TRAINED SHOULD
NOT HANDLE THIS CHEM/ITS CNTNR. THIS PROD IS FURNISHED FOR LAB USE
ONLY! MFR'S PRODS MAY NOT BE USED AS DRUGS, COSMETICS,
AGRICULTURAL/PESTICIDAL PRO DS, FOOD ADDITIVES/AS HOUSEHOLD CHEMS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:THIS CHEMICAL SHOULD BE HANDLED ONLY IN A HOOD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . USE APPROPRIATE OSHA/MSHA SAFETY EQUIPMENT.
Work Hygienic Practices:CONTACT LENSES SHOULD NOT BE WORN IN THE
LABORATORY.
Supplemental Safety and Health
FIRST AID PROC:IF PATIENT IS IN CARDIAC ARREST ADMIN CPR. CONTINUE LIFE
SUPPORTING MEASURES UNTIL MED ASSISTANCE HAS ARRIVED. NOTE:ANTIDOTE
IS SUBSTANCE INTENDED TO COUNTERACT EFT OF POIS. IT SHOULD B E
ADMIN ONLY BY MD/TRAINED EMER PERS. MED ADVICE CAN BE OBTAINED FROM
POIS CTL CTR. EYE PROT:& FULL LGTH FCSHLD .

Chemical Properties

Boiling Pt:B.P. Text:318F,159C
Spec Gravity:0.935
Solubility in Water:MISCIBLE
Appearance and Odor:COLORLESS LIQUID; STENCH!

Stability

Stability Indicator/Materials to Avoid:YES
INCOMPATIBLE W/STRONG OXIDIZING AGENTS, STRONG ACIDS, IRON & ZINC &
OTHER LIGHT METALS. CORRODES COPPER & ITS ALLOYS.
Stability Condition to Avoid:CORROSIVE.
Hazardous Decomposition Products:DECOMPOSITION LIBERATES TOXIC FUMES.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS . BURN IN A CHEMICAL INCINERATOR EQUIPPED W/AFTERBURNER
& SCRUBBER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.